2RZ Misting Cooling System Kit, Irrigation System 66FT(20M) Misting Line

2RZ Misting Cooling System Kit, Irrigation System 66FT(20M) Misting Line DIY Outdoor +20 Plastic Mist Nozzle for Lawn Patio Garden Greenhouse

• The fantastic water misters for cooling outdoor provides a cool environment from the heat for your favorite outdoor areas, cools the surrounding air temperatures up to 20 degrees
• Energy conservation : Mister hose directly use tap water to spray and cool down, no electricity consumption, no energy consumption, save more money for you, and be an environmentalist
• Misting Cooling System widely apply for garden, Trampoline water park, landscaping, greenhouse, humidification, outdoor cooling system, epidemic prevention, spraying disinfectant, deodorant air purification, Swimming pool misting fog cooling, Mist mosquito system and so on
• Simple installation without digging or plumbing skills.
• Flow rate: 5-5.5 L/Hour , Pressure: 220-280 Kpa, Spray diameter: 1.2-1.8 meters

Why 2RZ Mist Cooling System is Your Best Choice?
outdoor cooling system provides a cool environment from the heat for your favorite outdoor areas, cools the surrounding air temperatures up to 20 degrees
Saves up to 70% water over traditional spray heads Kit Contents:
1 x 20M 1/4″ PE tube (ID4mm/OD7mm)
1 x 1/2″ 3/4″ garden tube quick socket
20 x Plastic mister nozzles
1 x End connector
19 x Tee connector
19 x Cable ties Installation instructions:
1.Cut the black PE tube into several parts according to your requirements
2.Assemble the misting nozzles with Tee Connectors / End Connectors
3.Attach the nozzles into the tube (Tips: Put the connected part of the tube into the hot air for about 10 seconds and about 3 turns before assembling. The idea is very hot air, not direct contact with the flame)
4. Use the cable ties to fix the tube Kindly notice:
1. Make sure when you cut the rubber tube, to cut it straight and not at an angle.
2. You could try to add a water pump (about 30W-45W) if the local water pressure is too low.
3. Heat the PE tube first to make it soft, then insert the T Connector quickly with enough grip (Slowly twisting may damage the tube, and affect the function of the misting or leak)