Thibra3D SKULPT – Black

Sold by: Zedd

$22.29

Thibra3D SKULPT – Black

  • SKULPT 3D printed object only has to be degreased with soap and lukewarm water before painting
  • Leftover support structures can be reused for sculpting
  • Does not dry out or crack
  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

SKULPT is a unique sculptable 3D printer filament materialized by Thibra3D, which allows one to post process SKULPT 3D printed objects similar to sculpting clay. By projecting a temperature of70C on the SKULPT 3D printed object it will be possible to tweak and finetune the 3D printed object by sculpting it or remodelling it slightly.
Visible 3D printed layers and imperfections caused by blobs, zits, zippers and removed support structures on the SKULP 3D printed object can very easily be remodelled into a perfect smooth service and even detailed accents can be sculpted into the surface of the SKULPT 3D printed object.

Unique features

  • Sculptable by applying heat
    • Use a heat gun to project a temperature of70C to the part of the SKULPT 3D printed object which requires finetuning by sculpting and/or remodelling
    • Easily smooth out visible 3D printed layers and imperfections caused by blobs, zits and removed support structures
  • Very easy to paint with acrylic paintsSKULPT 3D printed objects can be polished
    • SKULPT 3D printed object only has to be degreased with soap and lukewarm water before painting
  • Repeatedly sculptable and reusableSelf-supporting
    • SKULPT 3D printed objects can continuously sculpted by remodelling, carving, cutting, adding extra material SKULPT material, etc
    • Leftover support structures can be reused for sculpting
    • Does not dry out or crack

General printing guidelines *
Nozzle size:0.4mm
Layer height:0.2mm
Flow rate:110 – 121% *
Print temp:190 – 220C *
Print speed: Medium
Retraction: Yes1.5 – 3mm
Heat bed:45 – 60C *
Fan speed: 100%
Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*) For printers that use a 2.85mm SKULPT 3D printer filament the recommended printing (nozzle) temperature range is200 – 220C (benchmarked on Ultimaker 2. For printers that use a 1.75mm SKULPT 3D printer filament the recommended printing (nozzle) temperature range is190 – 210C (benchmarked on Prusa I3 MK2).
*) The heated bed should be set at 60C for 3D printing the first layer of your SKULPT 3D printed object and then lowered 45C for 3D printing the remainder of your SKULPT 3D printed object .
*) When 3D printing with SKULPT 3D printer filament on a 3D printer that uses 2.85mm SKULPT filament it is recommended to increase the flow rate to121% (benchmarked on Ultimaker 2). When 3D printing with SKULPT 3D printer filament on a 3D printer that uses 1.75mm SKULPT filament it is recommended to increase the flow rate to110% (benchmarked on Prusa I3 MK2).

Filament length
: 1.26 g/c
50 gr coil
0.75 Kg spool
1.75mm
16.5m
247m
2.85mm
6.2m
93m
Product export information|

HS Code: 39169090
Description: Monofilament
Country of origin: the Netherlands
Compliance *
This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Weight 500 g
Dimensions 22 × 16 × 7 cm
Brand

Unbranded

Product Enquiry