EasyFil PLA 1.75mm Glow in the Dark Green 50 gram

EasyFilPLA – Glow in the Dark

EasyFil PLA is a high-endeasy to useimpact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament.

Unique features

• Very easy to print
  • Warp-free printing and no deformation after cooling
  • Improved flowing behaviour and inter-layer adhesion
  • Good first layer adhesion to several (un)heated print surfaces
• Slightly softer than standard PLA resulting in improved strength and impact resistance
• Almost odourless processing/printing
• Biodegradable
• General printing guidelines *
• Nozzle size:0.15mm
• Layer height:0.1mm
• Flow rate:100%
• Print temp:180 – 220C
• Print speed:Medium
• Retraction:Yes – 5mm
• Heat bed:0 – 65C
• Fan speed:50-100%
• Experience level:Beginner
• *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
• Abrasiveness
• Please be aware that Glow in the Dark filaments contain a relatively high concentration of extremely hard phosphorous particles, which have an abrasive nature.In general these phosphorous particles will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.
• Filament length
• : 1.24g/cc
• 50 gr coil
• 0.75 Kg spool
• 1.75mm
• 16.8m
• 251m
• 2.85mm
• 6.3m
• 95m
• Product export information
• HS Code:39169090
• Description:Monofilament
• Country of origin:the Netherlands