Premium PLA 1.75mm Frosty White 8000 gram

• Very easy to print
• Warp-free printing and no deformation after cooling
• Improved flowing behaviour and inter-layer adhesion
• Good first layer adhesion to several (un)heated print surfaces
• Almost odourless processing/printing
• Biodegradable
• Available in a variety of semi-translucent colors and opaque black/white

General printing guidelines
Nozzle size:0.15mmLayer height:0.1mmFlow rate:100%Print temp:200 – 230CPrint speed:MediumRetraction:Yes5mmHeat bed:0 – 60CFan speed:50-100%Experience level:Beginner
Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length|
: 1.24 g/cc50 gr coil1 Kg spool2.3 Kg spool4.5 Kg spool8 Kg spool1.75mm16.8m335m771m1509m2682m2.85mm6.3m126m291m569m1011m
Product export information
HS CodeDescriptionCountry of origin39169090MonofilamentNetherlands
Compliance
This filament is compliant to below listed directives and regulations.

• RoHS directive 2011/65/EC
• REACH directive 1907/2006/EC

This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.